The names are generic (makeError, requireInt, parseFile), and at global scope
with external linkage they would form an overload set with the same-named
anonymous-namespace helpers in VisualsLoader.cpp and BalancingConfig.cpp the
moment either file includes TomlHelpers.h — silently, since the signatures
differ. Namespacing keeps that door shut.
Call sites are qualified explicitly rather than pulled in with a using
directive, matching how utility::getRandomInt and friends are already called.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
Finishes the ConfigLoader.cpp domain split. ConfigLoader.cpp now holds
only the cross-domain validateUnlocks pass and loadFromDirectory
orchestrator, as intended — everything else lives in its own
ConfigLoader<Domain>.cpp. Pure move; no logic change.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
Continues the ConfigLoader.cpp domain split. StatEntry/kKnownStats are
only used by loadModules, so they move along as a domain-local
anonymous-namespace table rather than into TomlHelpers. Pure move; no
logic change.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
Continues the ConfigLoader.cpp domain split. parseRotationString and
parsePlacedModules are only used by loadShips, so they move along as
domain-local anonymous-namespace helpers rather than into TomlHelpers.
Pure move; no logic change.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
Continues the ConfigLoader.cpp domain split. parseRecipeOutputs is only
used by loadRecipes, so it moves along as a domain-local anonymous-
namespace helper rather than into TomlHelpers. Pure move; no logic
change.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
ConfigLoader.cpp had grown to 877 lines by mixing generic TOML-parsing
helpers (used by every per-file loader) with per-domain parsing logic.
Splitting the file per config domain first requires pulling out the
helpers shared by two or more domains, so each domain .cpp can include
them without duplication. Pure move: no logic, message, or ordering
changes.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
TickAdvanced, BuildingBlocksChanged, ExpansionCostChanged, BossWaveUpdated and
ArtifactCountChanged all duplicated state the Simulation already owns. With
every subscriber re-reading from the sim, the fields had no readers left, so
the five events become payload-free refresh signals and the emitters keep the
values only as locals for change detection.
This makes the convention uniform: a state-change event backed by the
simulation carries nothing. Events whose state lives in the view (selection,
game speed, deconstruct and debug-draw modes) keep their payloads, since there
is no sim getter behind them.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
The last three payloads HeaderBar still consumed as truth. All are backed by
Simulation getters (getCurrentTick, getArtifactCount, getBossWaveCounter,
getBossCountdownTicks) and the win count by world.artifacts.artifactWinCount,
so the handlers now re-read rather than trust the event.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
BlueprintPanel was the second panel caching BuildingBlocksChangedEvent's
payload as truth; it already held a Simulation*, so refreshButtonStates()
now re-reads getBuildingBlocksStock() at the point of use, per the "events
are refresh signals" rule.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
ShipLayoutPreview was the one widget the findFooDef sweep missed: it held a
bare const std::vector<ModuleDef>* rather than a config, so the shared
ModulesConfig::findModuleDef was not a drop-in and the file-local copy
survived. Hold the ModulesConfig instead and call the shared finder.
The sole caller already had the ModulesConfig one dereference away.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01YHcUerKAZKWNvSKJxYKbnG
BuildingSystem::findBuildingDef was a byte-equivalent re-implementation of
BuildingsConfig::findBuildingDef. Same cleanup as the GameWorldView copy;
this one sits in the sim layer, so it was missed by both earlier passes.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
The Restart button on the Win dialog called Simulation::reset() directly,
while the escape-menu and Game Over restarts enqueue a ResetCommand. That
bypassed the command chokepoint every sim mutation is supposed to flow
through (docs/replay_design.md), so a post-win restart was never recorded
into the replay stream, and it had UI code calling a sim mutator directly.
Mirror the Game Over path instead. The manual resetForNewGame() call goes
away with it: GameWorldView::onFrame already resets the view when it drains
a Reset command.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
The two executors were line-for-line duplicates: orbit the behavior target,
then hand it to the owner's in-range modules. Both now call a templated
executeOrbitAndAssign<Behavior, ModuleComponent>; the view types, iteration
order, and sequence of component writes are unchanged.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
Four MainWindow sites hand-rolled snapshot speed / setGameSpeed(0) / modal /
restore + resetFrameTimer, with the restore duplicated on early-return paths.
ModalPauseScope does it via RAII, with restore()/release() for the two sites
that must restore early or not at all.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
The three restart paths each repeated the same config + visuals reload with
its own try/catch and error dialog. Only that shared part is extracted; each
site keeps its own follow-up (ResetCommand vs. direct Simulation::reset) and
its own error-path cleanup.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
Four separate caches rasterized the same item SVGs, one of them rebuilt on
every recipe-dialog open. MainWindow now owns one cache and hands a
non-owning pointer to HeaderBar, BuildButtonGrid, GameWorldView and
RecipeSelectionDialog.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
HeaderBar was the only panel caching event payloads as truth. It now holds
a const Simulation* and re-reads getBuildingBlocksStock() /
getCurrentExpansionCost() in the handlers, per the "events are refresh
signals" rule.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
The identical 7-line TunnelLookup lambda existed in updateTunnelGhost and
drawSelectedTunnelConnections; it is now GameWorldView::makeTunnelLookup.
The tile key moved from std::pair<int, int> to QPoint with the existing
QPointCompare comparator, dropping the manual packing at every site.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
The constructor and reset() held a character-for-character identical
26-line subsystem construction block, including three capturing lambdas.
Both run before the first tick, so the closures can be shared. Order is
unchanged.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
Ships/Modules/RecipesConfig now carry lookup helpers mirroring
BuildingsConfig::findBuildingDef. The hand-rolled linear scans in
BuildingSystem, ShipSystem, ShipStatsCalculator, ThreatCostCalculator,
ShipLayoutDialog, SelectedBuildingPanel and SchematicChoiceDialog now
call them instead.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
GameWorldView::findBuildingDef was a byte-equivalent re-implementation of
BuildingsConfig::findBuildingDef. All call sites now use the config helper,
matching SelectedBuildingPanel and BlueprintPanel.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
rotateInPlace re-implemented the belt-tile re-registration switch inline
instead of calling reregisterBeltTile, and its splitter branch omitted the
setSplitterFilters call the canonical version has. Since an operational
splitter keeps its filters only in BeltSystem, removeTile discarded them and
rotating a configured splitter silently reset it to "accept all".
Replace the duplicated switch with a call to reregisterBeltTile, capturing
the filters beforehand via getSplitterInfo — the same idiom deconstruct
already uses. This removes the second copy of the switch that allowed the
two to drift apart in the first place.
Add a regression test; the existing [rotate-in-place] cases covered belt
tiles only, which is why this went unnoticed.
Co-Authored-By: Claude <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01GH8ZMRY3vhxxXcaUxBqxkk
