give each output item its own buffer

The Reprocessing Plant held at most one cycle's output, so a single item
anywhere in the building -- buffer or still emerging -- stopped the next cycle.
That cap existed only to deny a reroll: with room for one item, stalling the
output belt could not make the plant discard a roll and try again.

Replace it with the general rule. Every item a recipe can produce gets its own
buffer of twice its per-cycle amount, mirroring the input side, and a cycle
starts only when every output it could produce fits. For a deterministic recipe
that is just its own outputs, so nothing changes there. For the plant it means
all possible rolls must fit, which denies the reroll as before -- a full buffer
for one item stops the plant entirely rather than letting it go on producing
only the others -- while allowing an output amount above one.

Also pins what "the next buffered item" means at the output port now that one
queue no longer implies it: items leave in production order whatever their
type. Status light and output chip wording follow, since a buffer short of a
full cycle's worth blocks exactly as a full one does.

Requirements only; the implementation follows.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Ne3mejABZoLWKLh8fgpM3x

docs/requirements.md

@@ -152,9 +152,9 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
 - REQ-BLD-MINER: **Miner** (2×2): The player selects which ore type it extracts. Each ore type corresponds to a `recipes.toml [[recipe]]` entry with `building = "miner"`, defining the output item and `duration_seconds`. Every asteroid tile is equivalent for mining — any miner can produce any ore type based solely on its selected recipe. Ore never depletes. Only implicitly unlocked ore-type recipes are available for selection (REQ-LOCK-UI-RECIPE).
 - REQ-BLD-SMELTER: **Smelter** (2×2): Converts ore or scrap into basic materials. No recipe selection required. Inputs, outputs, and rates are defined in `recipes.toml [[recipe]]` entries with `building = "smelter"`.
 - REQ-BLD-ASSEMBLER: **Assembler** (3×3): The player selects a recipe from the config-defined crafting tree. Produces the selected output item at the rate defined in the corresponding `recipes.toml [[recipe]]` entry with `building = "assembler"`. Only implicitly unlocked recipes are available for selection (REQ-LOCK-UI-RECIPE).
-- REQ-BLD-REPROCESSING: **Reprocessing Plant** (3×3): Consumes scrap per cycle and produces exactly one higher-level intermediate product per cycle via weighted random pick. The input quantity, possible output items, per-output weights, and amounts are defined in `recipes.toml [[recipe]]` entries with `building = "reprocessing_plant"` (`inputs`, `outputs[].item`, `outputs[].amount`, `outputs[].weight`). Weights are normalized at load time; their sum does not need to equal 1. The output is rolled at cycle start (see REQ-MAT-CYCLE); the pool of eligible outputs is restricted to implicitly unlocked item types (REQ-LOCK-REPROCESSING-POOL). The output buffer holds at most one cycle's output — see REQ-MAT-OUTPUT-BUFFER-REPROCESSING.
+- REQ-BLD-REPROCESSING: **Reprocessing Plant** (3×3): Consumes scrap per cycle and produces exactly one **kind** of higher-level intermediate product per cycle via weighted random pick, in that output's configured amount (which may be more than one item). The input quantity, possible output items, per-output weights, and amounts are defined in `recipes.toml [[recipe]]` entries with `building = "reprocessing_plant"` (`inputs`, `outputs[].item`, `outputs[].amount`, `outputs[].weight`). Weights are normalized at load time; their sum does not need to equal 1. The output is rolled at cycle start (see REQ-MAT-CYCLE); the pool of eligible outputs is restricted to implicitly unlocked item types (REQ-LOCK-REPROCESSING-POOL). Its output side follows the general rules with no exception: one buffer per possible output item (REQ-MAT-OUTPUT-BUFFER), and a cycle starts only when every possible roll would fit (REQ-MAT-CYCLE) — which is also what denies the player a reroll by stalling the output belt.
 - REQ-BLD-SHIPYARD: **Shipyard** (4×2): The player selects a schematic. When all required materials — the ship's base materials (`[ship.schematic].materials`) plus the materials of all modules in the configured layout (REQ-MOD-MATERIALS) — are present in its input buffer, the shipyard consumes them and begins a production cycle lasting the ship's base `[ship.schematic].production_time_seconds` plus the sum of production times contributed by all module instances in the configured layout (REQ-MOD-PRODUCTION-TIME). One ship of that type is spawned with the configured modules when the cycle completes. The shipyard cannot start a new cycle while one is in progress. If the player confirms a layout change (REQ-MOD-UI-DIALOG) while a production cycle is in progress, the current cycle is cancelled and all consumed materials are discarded; the shipyard returns to idle with the new layout configuration. Confirming a layout identical to the one already configured is not a change and cancels nothing (REQ-MAT-INPUT-BUFFER).
-- REQ-BLD-SALVAGE-BAY: **Salvage Bay** (3×2): A dedicated drop-off point for salvage ships. It has an output buffer whose holding capacity is defined by the `output_buffer_capacity` field of the `salvage_bay` entry in `buildings.toml` (rather than by a production cycle, since the Salvage Bay has no recipe). A ship at the bay hands over one unit of scrap per tick while the buffer has free space; a full buffer blocks further drop-off until space frees up (consistent with the buffer-full semantics of REQ-MAT-OUTPUT-BUFFER). Held scrap is pushed onto connected output belts.
+- REQ-BLD-SALVAGE-BAY: **Salvage Bay** (3×2): A dedicated drop-off point for salvage ships. It has a single output buffer — scrap is the only thing it ever holds — whose holding capacity is defined by the `output_buffer_capacity` field of the `salvage_bay` entry in `buildings.toml` (rather than by a production cycle, since the Salvage Bay has no recipe). A ship at the bay hands over one unit of scrap per tick while the buffer has free space; a full buffer blocks further drop-off until space frees up (consistent with the buffer-full semantics of REQ-MAT-OUTPUT-BUFFER). Held scrap is pushed onto connected output belts.
 - REQ-BLD-BELT: **Belt** (1×1): Transports items. A belt tile has one direction (N, S, E, W) set at placement (modified by rotation). Curved belts are auto-derived: when a belt tile's outgoing direction leads into another belt whose direction is orthogonal, the downstream belt is rendered and behaves as a curve. Belt speed is defined in `world.toml [world].belt_speed_tiles_per_second` (REQ-GW-BELT-SPEED). A belt accepts items only through a non-output edge (REQ-MAT-ACCEPT-DIR).
 - REQ-BLD-SPLITTER: **Splitter** (1×1): Distributes incoming items between two output directions. Incoming items are accepted only through the splitter's non-output edges (REQ-MAT-ACCEPT-DIR). Each output can optionally have a filter (a list of item types), configurable via the selection panel; only implicitly unlocked item types are available as filter options (REQ-LOCK-UI-SPLITTER). Routing rules:
   - An item matching only one output's filter is routed to that output.
@@ -187,8 +187,8 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
   - **Intake rendering (no pop-out).** Mirror of the emergence rendering in REQ-MAT-OUTPUT-EMERGE: the building is rendered over the input belt, so an in-transit item is occluded while inside the footprint and is only visible as it crosses the outer edge — appearing to sink into the port. The portion inside the footprint is hidden, and the item disappears at the tile centre (progress 0.5) as it enters the buffer.
 - REQ-MAT-OUTPUT-PORT: Each building has one or more fixed output port(s) defined by its surface_mask (direction determined by rotation). Produced items do not appear on the outgoing belt instantly; each item leaves the building by first emerging across the output port tile on that port's own output belt and then transferring onto the adjacent real belt tile (REQ-MAT-OUTPUT-EMERGE). The adjacent belt's direction is otherwise unconstrained (it may flow away from the building or perpendicular to it), except that a belt oriented with its own output edge facing back into the building refuses the transfer and the item stays stuck at the port (REQ-MAT-ACCEPT-DIR, REQ-MAT-OUTPUT-EMERGE).
 - REQ-MAT-OUTPUT-EMERGE: Items emerge from a building output port as an animation rather than popping directly onto the outgoing belt. Each output port has its own **output belt** — a virtual belt tile occupying the output port tile, oriented in the port's facing direction, with progress 0.0 at the tile's inner edge and 1.0 at the outer (port) edge adjacent to the next real belt tile. It reuses the belt subsystem: movement at belt speed (REQ-GW-BELT-SPEED), item rendering and spacing (REQ-GW-TILE-SIZE), and capacity/packing (REQ-GW-BELT-CAPACITY), but restricted to the 0.5→1.0 half of the tile. This applies to every building that outputs items onto belts (Miner, Smelter, Assembler, Reprocessing Plant, Salvage Bay); it does not apply to the Shipyard, which spawns a ship rather than a belt item (REQ-SHP-SPAWN-PLAYER).
-  - **Feeding.** While the output buffer (REQ-MAT-OUTPUT-BUFFER) holds an item that has not yet begun emerging and the output belt's entry slot at progress 0.5 is free (per REQ-GW-BELT-CAPACITY spacing — no emerging item within a quarter tile of progress 0.5), the next buffered item is placed on the output belt at progress 0.5. Because only the 0.5→1.0 span is used, the output belt holds at most three emerging items (progress 0.5, 0.75, 1.0); once that span is full the building places no further items on it even if the output buffer still holds more.
+  - **Feeding.** While the output buffers (REQ-MAT-OUTPUT-BUFFER) hold an item that has not yet begun emerging and the output belt's entry slot at progress 0.5 is free (per REQ-GW-BELT-CAPACITY spacing — no emerging item within a quarter tile of progress 0.5), the longest-waiting buffered item is placed on the output belt at progress 0.5. Items leave in the order they were produced whatever their type, so per-item-type buffers do not reorder what comes out of the port. Because only the 0.5→1.0 span is used, the output belt holds at most three emerging items (progress 0.5, 0.75, 1.0); once that span is full the building places no further items on it even if the output buffers still hold more.
-  - **Cosmetic hold.** An emerging item still counts as residing in the output buffer (REQ-MAT-GLOBAL-STOCK) for the whole animation; it only leaves the building when it transfers onto a real belt tile at progress 1.0. The output belt therefore adds no inventory capacity beyond the output buffer, and clearing the output buffer on a recipe or schematic change (REQ-MAT-OUTPUT-BUFFER) also removes any items currently emerging.
+  - **Cosmetic hold.** An emerging item still counts as residing in its output buffer (REQ-MAT-GLOBAL-STOCK) for the whole animation; it only leaves the building when it transfers onto a real belt tile at progress 1.0. The output belt therefore adds no inventory capacity beyond the output buffers, and clearing them on a recipe or schematic change (REQ-MAT-OUTPUT-BUFFER) also removes any items currently emerging.
   - **Travel & handoff.** An emerging item advances from progress 0.5 to 1.0 at belt speed. At progress 1.0 it attempts to transfer onto the adjacent real belt tile using the normal belt hand-off and accept-direction rules (REQ-MAT-OUTPUT-PORT, REQ-MAT-ACCEPT-DIR): the transfer succeeds only if a transport tile exists there, is not oriented with its output edge facing back into the building, and has free space. On success the item leaves the output buffer and becomes an ordinary item on that belt tile. If instead the output port tile is a directly adjacent building's input edge, the item transfers straight into that building (REQ-MAT-DIRECT-COUPLE).
   - **Stuck items.** If there is no next real belt tile and no directly-coupled building (REQ-MAT-DIRECT-COUPLE), or the transfer is refused or blocked, the emerging item stops at progress 1.0 and is rendered there (still counted in the output buffer). Following items pile up behind it at progress 0.75 and 0.5 per the packing above, and once the 0.5→1.0 span is full no further items emerge until the front item transfers.
   - **Emergence rendering (no pop-in).** An emerging item must not simply appear at progress 0.5. The output port tile's building is rendered over the output belt, so an emerging item is occluded while inside the footprint and is revealed progressively as it slides past the port edge — appearing to physically emerge from the building. The portion of the item still within the output port tile is hidden; the portion past the outer edge is drawn.
@@ -198,9 +198,8 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
 - REQ-MAT-ACCEPT-DIR: A transport tile (belt, splitter, tunnel entry, or tunnel exit) accepts an incoming item only through a non-output edge; an item that would enter through one of the tile's output edges is refused. For a belt or a tunnel entry/exit the sole output edge is the one in its facing direction; for a splitter either of its two output directions is an output edge. This applies both to items pushed from an adjacent transport tile and to items deposited by a building's output port (REQ-MAT-OUTPUT-PORT).
 - REQ-MAT-INPUT-BUFFER: Each building has one input buffer per required input material. Each per-material buffer holds up to twice that material's per-cycle requirement. When the player selects a new recipe or schematic, all items in all input buffers are cleared.
   - **Setting a configuration to the value it already holds is a no-op.** Selecting the recipe or schematic already set, or applying a ship layout identical to the one already configured, changes nothing: buffers are not cleared, an in-progress production cycle is not cancelled (REQ-BLD-SHIPYARD), and a construction site's progress and stored settings are untouched. This holds however the setting is applied — through the selection dialog (REQ-UI-SELECT-BUTTON), the layout configuration dialog (REQ-MOD-UI-DIALOG), a blueprint placement (REQ-UI-BLUEPRINT-PLACE), or a blueprint configuration transfer (REQ-UI-BLUEPRINT-TRANSFER). Only a setting that genuinely differs has effects.
-- REQ-MAT-OUTPUT-BUFFER: Each building has an output buffer that holds up to twice the quantity produced by one production cycle. If the output buffer is full, production stops until space is available. When the player selects a new recipe or schematic, all items in the output buffer are cleared (relevant when the adjacent belt is jammed and items have accumulated). Re-applying a setting the building already has clears nothing, per REQ-MAT-INPUT-BUFFER.
+- REQ-MAT-OUTPUT-BUFFER: Each building has **one output buffer per item its recipe can produce** — each output of a deterministic recipe, and every possible roll of a probabilistic one (REQ-BLD-REPROCESSING). Each per-material buffer holds up to twice that item's per-cycle amount, mirroring the input side (REQ-MAT-INPUT-BUFFER); a buffer's contents never occupy another item's capacity. An emerging item still occupies its buffer for the whole animation (REQ-MAT-OUTPUT-EMERGE). Whether a buffer without room stops production is decided by REQ-MAT-CYCLE. When the player selects a new recipe or schematic, all items in all output buffers are cleared (relevant when the adjacent belt is jammed and items have accumulated). Re-applying a setting the building already has clears nothing, per REQ-MAT-INPUT-BUFFER. Two buildings stand outside this rule: the Shipyard has no output buffer at all, since it spawns a ship rather than producing items (REQ-BLD-SHIPYARD), and the Salvage Bay has no recipe, so its single scrap buffer is sized by config instead (REQ-BLD-SALVAGE-BAY).
-- REQ-MAT-OUTPUT-BUFFER-REPROCESSING: Exception to REQ-MAT-OUTPUT-BUFFER — the Reprocessing Plant's output buffer holds at most one cycle's output. This prevents exploits where the player stalls the output belt to force the plant to reroll.
+- REQ-MAT-CYCLE: Production cycle lifecycle. When a building is idle, it attempts to start a new cycle: (a) all required inputs must be present in the per-material input buffers, and (b) **every** output the cycle could produce must fit in that item's own output buffer (REQ-MAT-OUTPUT-BUFFER). For a deterministic recipe (b) is simply its own outputs. The Reprocessing Plant rolls its output at cycle start (weighted pick, REQ-BLD-REPROCESSING), so every possible roll must fit: the roll is committed the moment the cycle begins, and a cycle whose result could not be stored must not be started at all. Testing every possibility rather than the rolled one is what keeps a stalled output belt from biasing the distribution — with one item type's buffer full the plant stops entirely instead of going on producing only the others. On cycle start, inputs are consumed immediately and the production timer begins. On cycle completion, the (already-decided) output is deposited into its output buffer and the building returns to idle.
-- REQ-MAT-CYCLE: Production cycle lifecycle. When a building is idle, it attempts to start a new cycle: (a) all required inputs must be present in the per-material input buffers, and (b) the cycle's output must fit in the output buffer. For the Reprocessing Plant, the output is picked at cycle start (weighted pick); the cycle only starts if that chosen output fits. On cycle start, inputs are consumed immediately and the production timer begins. On cycle completion, the (already-decided) output is deposited into the output buffer and the building returns to idle.
 - REQ-MAT-GLOBAL-STOCK: The building blocks stock is the only global inventory. All other materials exist only in building buffers or on belt tiles.
 
 ## Resources
@@ -497,9 +496,9 @@ The screen is a single column: a header bar across the top and the game world vi
   - For the five production buildings (Miner, Smelter, Assembler, Reprocessing Plant, Shipyard), the fill color is determined by evaluating, in order:
     - **Grey** — no recipe or schematic is selected. This applies only to buildings with a player-facing selection (Miner, Assembler, Shipyard); the Smelter and Reprocessing Plant always run an implicit recipe (REQ-BLD-SMELTER, REQ-BLD-REPROCESSING) and are never grey.
     - **Green** — the building is currently producing: a production cycle is active (REQ-MAT-CYCLE; for the Shipyard, an in-progress production cycle per REQ-BLD-SHIPYARD).
-    - **Red** — the building is idle because a required input is missing from its input buffers, so it cannot start a cycle. Missing input takes precedence over a full output buffer: if any required input is missing the light is red even when the output buffer is also full.
+    - **Red** — the building is idle because a required input is missing from its input buffers, so it cannot start a cycle. Missing input takes precedence over a blocked output side: if any required input is missing the light is red even when an output buffer is also out of room.
-    - **Yellow** — the building is idle with all required inputs present but its output buffer full, so no new cycle can start (REQ-MAT-OUTPUT-BUFFER, REQ-MAT-CYCLE).
+    - **Yellow** — the building is idle with all required inputs present but the output side cannot take the cycle: at least one item the cycle could produce has no room in its own buffer, so no new cycle can start (REQ-MAT-OUTPUT-BUFFER, REQ-MAT-CYCLE). A buffer short of a full cycle's worth of free space blocks just as a completely full one does.
-    - A configured building that is momentarily idle yet blocked by neither condition (all inputs present and the output buffer has room — a transient state that resolves into a started cycle on the same or the next tick per REQ-MAT-CYCLE) shows green.
+    - A configured building that is momentarily idle yet blocked by neither condition (all inputs present and room for every output the cycle could produce — a transient state that resolves into a started cycle on the same or the next tick per REQ-MAT-CYCLE) shows green.
   - The Salvage Bay has no recipe and no production cycle (REQ-BLD-SALVAGE-BAY); its status light uses only two states: **green** while its output buffer holds at least one unit of scrap, and **red** while its output buffer is empty. The Salvage Bay's status light is never grey or yellow.
   - The four fill colors (grey, green, red, yellow) and the outline color are read from `visuals.toml [status_light]`, consistent with the other rendering-only colors. The status light is presentation-only and has no effect on the simulation.
 - REQ-UI-HP-BARS: All entities with HP — the HQ, player and enemy defence stations, and player and enemy ships — render an HP bar below them. The bar is always visible regardless of current HP. The bar's filled portion represents the fraction of current HP to maximum HP.
@@ -581,7 +580,7 @@ The panel shows exactly one **content** at a time, picked from the catalog in RE
   Every other multi-selection falls back to the count summary. In particular a selection mixing a splitter with belts does not aggregate (a splitter carries per-object output filters, which have no aggregate), and neither do several production buildings of one type (per-building buffers and cycle progress have no aggregate).
 - REQ-UI-SINGLE-SELECTION: When one building is selected, the panel shows its symbol and name in the header (REQ-UI-SELECTION-CARD), its current recipe or schematic selection (REQ-UI-SELECT-BUTTON) and recipe summary (REQ-UI-RECIPE-SUMMARY) in the configuration group, and its input and output buffer contents in the runtime group. Each buffered item is shown as an **item chip** bearing that item's icon on its colored square (REQ-UI-ITEM-ICON) and its current count, and hovering a chip shows that item's production tooltip (REQ-UI-ITEM-TOOLTIP):
   - an **input** chip shows the per-cycle amount below the count (the items consumed per run, e.g. `/ 2 per cycle`), or the count alone when the building has no selected recipe or schematic to give one;
-  - an **output** chip shows the count against the output buffer's capacity as `a / b` (REQ-MAT-OUTPUT-BUFFER), with the item's name below.
+  - an **output** chip shows the count against **that item's own** output buffer capacity as `a / b` (REQ-MAT-OUTPUT-BUFFER), with the item's name below. Each output chip therefore stands for one buffer, and a Reprocessing Plant shows one per possible roll.
 
   Input and output chips form separately captioned sections (REQ-UI-SELECTION-CARD). A section lists a chip for **every item the building's cycle involves**, and for an auto-recipe building every item it handles at all, whether or not the buffer currently holds any: an empty buffer reads `0` rather than its chip disappearing, so the card keeps one shape while the building runs. A section left with no chips at all is not shown. The production section (REQ-UI-PRODUCTION-PROGRESS) sits **between them**, so the card reads in the direction the materials flow: what goes in, what is being made of it, what has come out. For a selected construction site the buffer sections are omitted (REQ-BLD-SITE-CONFIG).