Always show shipyard layout preview and Configure button, disabled until schematic selected

docs/requirements.md

@@ -259,7 +259,7 @@ Modules in `modules.toml` define a `surface_mask` — a list of strings that des
 
 ### Module UI
 
-- REQ-MOD-UI-PREVIEW: When a schematic is selected in a shipyard's selected building panel, a small non-interactive **ship layout preview** widget is shown below the schematic selection button (REQ-UI-SELECT-BUTTON). The preview renders the ship's layout grid at a reduced scale: buildable cells without a module are shown as white, non-buildable cells are shown as black, and cells occupied by a module are shown in that module's `fill_color` with the module's `glyph` character. Below the preview, a "Configure" button is shown.
+- REQ-MOD-UI-PREVIEW: For a selected shipyard (operational building or construction site), the selected building panel always shows a small non-interactive **ship layout preview** widget below the schematic selection button (REQ-UI-SELECT-BUTTON) and a "Configure" button below the preview. Both are **disabled while no schematic is selected**, and enabled once one is; the preview then shows an empty placeholder in place of a layout grid. When a schematic is selected, the preview renders the ship's layout grid at a reduced scale: buildable cells without a module are shown as white, non-buildable cells are shown as black, and cells occupied by a module are shown in that module's `fill_color` with the module's `glyph` character. For non-shipyard buildings, neither the preview nor the "Configure" button is shown.
 - REQ-MOD-UI-DIALOG: Clicking the "Configure" button opens the **layout configuration dialog** as a modal. While the dialog is open, the game is paused (speed set to 0×). On close, the game speed is restored to what it was before the dialog was opened.
 
   The dialog contains:

src/ui/MainWindow.cpp

@@ -49,8 +49,8 @@ MainWindow::MainWindow(Simulation* sim, const std::string& configDir,
 
     m_sidePanel = new QWidget(this);
     QVBoxLayout* sideLayout = new QVBoxLayout(m_sidePanel);
-    sideLayout->setContentsMargins(0, 0, 0, 0);
-    sideLayout->setSpacing(0);
+    sideLayout->setContentsMargins(1, 1, 1, 1);
+    sideLayout->setSpacing(1);
 
     m_selectedBuildingPanel = new SelectedBuildingPanel(sim, &sim->config(), m_sidePanel);
     m_buildButtonGrid       = new BuildButtonGrid(&sim->config(), m_sidePanel);
@@ -60,6 +60,20 @@ MainWindow::MainWindow(Simulation* sim, const std::string& configDir,
     sideLayout->addWidget(m_buildButtonGrid,       1);
     sideLayout->addWidget(m_blueprintPanel,        1);
 
+    // Draw a thin border around each of the three side-panel sections. The class
+    // scoped selectors keep the border on the panels themselves rather than
+    // cascading onto their child widgets; WA_StyledBackground lets the plain
+    // QWidget subclasses honor the stylesheet box (border/background).
+    for (QWidget* panel : { static_cast<QWidget*>(m_selectedBuildingPanel),
+                            static_cast<QWidget*>(m_buildButtonGrid),
+                            static_cast<QWidget*>(m_blueprintPanel) })
+    {
+        panel->setAttribute(Qt::WA_StyledBackground, true);
+    }
+    m_sidePanel->setStyleSheet(QStringLiteral(
+        "SelectedBuildingPanel, BuildButtonGrid, BlueprintPanel {"
+        " border: 1px solid palette(mid); }"));
+
     m_gameWorldView->setFocus();
 
     connect(qApp, &QApplication::focusChanged, this, [this](QWidget*, QWidget* newWidget) {

src/ui/SelectedBuildingPanel.cpp

@@ -566,11 +566,21 @@ void SelectedBuildingPanel::updateShipyardLayoutWidgets(
     const std::string& recipeId,
     const std::optional<ShipLayoutConfig>& shipLayout)
 {
-    const ShipDef* shipDef = (type == BuildingType::Shipyard)
-        ? findShipDef(recipeId)
-        : nullptr;
+    // The preview and Configure button are shipyard-only controls; hide them
+    // entirely for other building types.
+    if (type != BuildingType::Shipyard)
+    {
+        m_layoutPreview->hide();
+        m_configureLayoutBtn->hide();
+        return;
+    }
 
-    if (shipDef && !shipDef->layout.empty())
+    const ShipDef* shipDef = findShipDef(recipeId);
+    const bool hasSchematic = shipDef && !shipDef->layout.empty();
+
+    // Always show the preview and Configure button for a shipyard; they are only
+    // enabled once a schematic is selected (REQ-MOD-UI-PREVIEW).
+    if (hasSchematic)
     {
         ShipLayoutConfig layout;
         if (shipLayout.has_value())
@@ -579,14 +589,16 @@ void SelectedBuildingPanel::updateShipyardLayoutWidgets(
         }
         m_layoutPreview->setShipAndLayout(
             shipDef->layout, layout, &m_config->modules.modules);
-        m_layoutPreview->show();
-        m_configureLayoutBtn->show();
     }
     else
     {
-        m_layoutPreview->hide();
-        m_configureLayoutBtn->hide();
+        m_layoutPreview->showPlaceholder();
     }
+
+    m_layoutPreview->setEnabled(hasSchematic);
+    m_configureLayoutBtn->setEnabled(hasSchematic);
+    m_layoutPreview->show();
+    m_configureLayoutBtn->show();
 }
 
 const RecipeDef* SelectedBuildingPanel::findRecipe(const Building* b) const

src/ui/ShipLayoutPreview.cpp

@@ -8,6 +8,10 @@ namespace
 
 const int kCellSize = 8;
 
+// Size of the empty placeholder box shown when no schematic is selected.
+const int kPlaceholderWidth  = 64;
+const int kPlaceholderHeight = 40;
+
 const ModuleDef* findModuleDef(const std::vector<ModuleDef>& modules,
                                const std::string& id)
 {
@@ -90,14 +94,28 @@ void ShipLayoutPreview::clear()
     m_modules = nullptr;
     m_rows = 0;
     m_cols = 0;
+    m_placeholder = false;
     setFixedSize(0, 0);
     update();
 }
 
+void ShipLayoutPreview::showPlaceholder()
+{
+    m_grid.clear();
+    m_placedModules.clear();
+    m_modules = nullptr;
+    m_rows = 0;
+    m_cols = 0;
+    m_placeholder = true;
+    setFixedSize(kPlaceholderWidth, kPlaceholderHeight);
+    update();
+}
+
 void ShipLayoutPreview::setShipAndLayout(const std::vector<std::string>& shipLayout,
                                          const ShipLayoutConfig& layout,
                                          const std::vector<ModuleDef>* modules)
 {
+    m_placeholder = false;
     m_modules = modules;
     m_placedModules = layout.placedModules;
     m_rows = static_cast<int>(shipLayout.size());
@@ -156,6 +174,18 @@ void ShipLayoutPreview::setShipAndLayout(const std::vector<std::string>& shipLay
 
 void ShipLayoutPreview::paintEvent(QPaintEvent* /*event*/)
 {
+    if (m_placeholder)
+    {
+        QPainter painter(this);
+        painter.setRenderHint(QPainter::Antialiasing, false);
+        const QRect box = rect().adjusted(0, 0, -1, -1);
+        painter.fillRect(box, QColor(40, 40, 40));
+        painter.setPen(QColor(128, 128, 128));
+        painter.drawRect(box);
+        painter.drawText(box, Qt::AlignCenter, tr("No schematic"));
+        return;
+    }
+
     if (m_rows == 0 || m_cols == 0)
     {
         return;

src/ui/ShipLayoutPreview.h

@@ -20,6 +20,10 @@ public:
                           const std::vector<ModuleDef>* modules);
     void clear();
 
+    // Shows an empty placeholder box (no ship layout) so the preview stays
+    // visible while no schematic is selected (REQ-MOD-UI-PREVIEW).
+    void showPlaceholder();
+
 protected:
     void paintEvent(QPaintEvent* event) override;
 
@@ -35,4 +39,5 @@ private:
     const std::vector<ModuleDef>* m_modules;
     int m_rows;
     int m_cols;
+    bool m_placeholder = false;
 };