remove the Shift copy-building-settings gesture

docs/requirements.md

@@ -147,12 +147,6 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
 - REQ-BLD-DECONSTRUCT-CLICK: While in deconstruct mode (REQ-UI-HOTKEYS, REQ-UI-DECONSTRUCT-BUTTON), left-clicking a placed factory building or construction site in the game world marks it for demolition, following the rules of REQ-BLD-DECONSTRUCT: a fully-built building is added to the deconstruction queue (REQ-BLD-DECON-QUEUE), and a construction site is removed instantly with the full refund. Left-clicking a fully-built building that is **already in the deconstruction queue** instead removes it from the queue (un-queues it, REQ-BLD-DECON-QUEUE), with no refund; repeated clicks on the same building therefore alternate between queueing and un-queueing it. Clicking a building that cannot be deconstructed (the HQ or a player defence station, per REQ-BLD-DECONSTRUCT), or clicking empty world space, has no effect. Deconstruct mode stays active after each action so the player can continue without re-entering the mode; it is exited via the Q toggle (REQ-UI-HOTKEYS) or the Deconstruct button (REQ-UI-DECONSTRUCT-BUTTON).
 - REQ-BLD-DECONSTRUCT-BOX: While in deconstruct mode (REQ-UI-HOTKEYS, REQ-UI-DECONSTRUCT-BUTTON), the player can click and drag a selection box in the game world. A selection rectangle is drawn while dragging, using the same box-drag gesture and coverage semantics as the multi-select box (REQ-UI-MULTI-SELECT). On mouse up, following the rules of REQ-BLD-DECONSTRUCT: every construction site covered by the box is removed instantly with the full refund; and among the fully-built deconstructible buildings covered by the box, if **all** of them are already in the deconstruction queue they are all removed from it (un-queued, REQ-BLD-DECON-QUEUE), otherwise every covered building not yet in the queue is added to the deconstruction queue (already-queued ones stay). Buildings that cannot be deconstructed (the HQ and player defence stations, per REQ-BLD-DECONSTRUCT) are excluded from the box demolition; ships and defence stations are never affected.
 - REQ-BLD-SITE-CONFIG: A construction site — a building that has been placed but is still queued or under construction (REQ-BLD-QUEUE) — can be selected and configured exactly like the equivalent operational building, before it finishes building. Whatever configuration the building type supports is available on the site: the recipe for a Miner or Assembler (REQ-UI-SELECT-BUTTON), the produced-ship schematic and its module layout for a Shipyard (REQ-UI-SELECT-BUTTON, REQ-MOD-UI-PREVIEW, REQ-MOD-UI-DIALOG), and the output filters for a Splitter (REQ-BLD-SPLITTER) — all set through the same Selected Building Panel controls (REQ-UI-CONFIG-INLINE). Only currently unlocked recipes and schematics are offered, exactly as for operational buildings (REQ-LOCK-UI-RECIPE, REQ-LOCK-UI-SCHEMATIC, REQ-LOCK-UI-SPLITTER). The configuration is stored on the construction site and carries over unchanged when construction completes, so the building becomes operational already configured. A construction site has no input/output buffers and runs no production cycle, so the buffer and production-progress portions of the panel (REQ-UI-SINGLE-SELECTION, REQ-UI-PRODUCTION-PROGRESS) are not shown for it; only its construction progress (REQ-UI-CONSTRUCTION-PROGRESS) and its configuration controls appear. (Blueprint placement already applies a stored recipe or schematic to a construction site on placement per REQ-UI-BLUEPRINT-PLACE; this requirement additionally lets the player set or change that configuration directly on an existing site.)
-- REQ-BLD-COPY-CONFIG: **Copy building settings (hold Shift).** While the Shift key is held, the player can copy one building's settings onto other buildings of the same type, so several identical machines can be set up without opening each one's panel. This gesture is available only in the default selection mode; while a builder, blueprint placement, or deconstruct mode is active it is disabled, so it never clashes with placement or demolition clicks.
-  - **Shift + right-click** a building copies its current settings into a temporary cache, along with the building's type. The settings copied are whatever that building type supports: the selected recipe (Miner, Assembler), the selected schematic together with its module layout (Shipyard), or the two output filters (Splitter, REQ-BLD-SPLITTER). Copying succeeds only when there is something to copy — a Miner or Assembler with a recipe selected, a Shipyard with a schematic selected, or any Splitter (whose output filters, even when empty/accept-all, always constitute valid settings). Shift + right-clicking a configurable building with nothing yet selected, a building type that has no settings at all (Smelter, Reprocessing Plant, Salvage Bay, belt/tunnel tiles, the HQ), or empty world space, has no effect and leaves any existing cache unchanged.
-  - **Shift + left-click** a building of the **same type** as the cached one applies the cached settings to it, exactly as if the player had made that selection through the selected building panel — with the same effects as a normal selection change (buffer clearing per REQ-MAT-INPUT-BUFFER and REQ-MAT-OUTPUT-BUFFER, and, for a Shipyard, in-progress cycle cancellation per REQ-BLD-SHIPYARD). This can be repeated on any number of same-type buildings while Shift stays held. Shift + left-clicking a building of a different type than the cached one, any building while the cache is empty, or empty world space, has no effect.
-  - Both operational buildings and construction sites take part as source and target (REQ-BLD-SITE-CONFIG); settings applied to a construction site carry over unchanged when it finishes building.
-  - **Releasing Shift clears the temporary cache.** It is never persisted and does not survive Shift being released; the next copy starts fresh.
-  - Because the cached settings were already valid on a same-type source building, they remain valid and available on the target (a selected recipe/schematic stays unlocked per REQ-LOCK-UI-RECIPE and REQ-LOCK-UI-SCHEMATIC; splitter filter item types stay unlocked per REQ-LOCK-UI-SPLITTER).
 
 ## Building Types
 
@@ -323,7 +317,7 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
 
 - REQ-MOD-UI-EMPTY-PULSE: While a module is selected for placement in the layout configuration dialog (REQ-MOD-UI-DIALOG), the empty buildable cells of the layout grid pulse smoothly around their normal fill shade, oscillating between a slightly darker and a slightly brighter shade at approximately 1 Hz (one full cycle per second), to draw the player's attention to where the module can be placed. All empty buildable cells pulse in phase. When no module is selected for placement (including remove mode), empty buildable cells render at their normal static shade. Non-buildable cells and cells occupied by a placed module do not pulse.
 
-- REQ-MOD-UI-AUTO-DIALOG: When the player selects a schematic for a shipyard (operational building or construction site) through the schematic selection dialog (REQ-UI-SELECT-BUTTON), and the chosen schematic **differs** from the shipyard's current schematic, the layout configuration dialog (REQ-MOD-UI-DIALOG) opens automatically and immediately once the selection dialog closes — exactly as if the player had then clicked "Configure". Re-selecting the schematic already set does not reopen the dialog. This auto-open applies only to the manual schematic selection dialog; schematic changes applied via the copy-settings gesture (REQ-BLD-COPY-CONFIG) or blueprint placement (REQ-UI-BLUEPRINT-PLACE) do **not** auto-open the dialog. The player may still cancel the auto-opened dialog (REQ-MOD-UI-DIALOG), which leaves the newly selected schematic in place with its default empty layout; the "Configure" button (REQ-MOD-UI-PREVIEW) remains available to open the dialog again later.
+- REQ-MOD-UI-AUTO-DIALOG: When the player selects a schematic for a shipyard (operational building or construction site) through the schematic selection dialog (REQ-UI-SELECT-BUTTON), and the chosen schematic **differs** from the shipyard's current schematic, the layout configuration dialog (REQ-MOD-UI-DIALOG) opens automatically and immediately once the selection dialog closes — exactly as if the player had then clicked "Configure". Re-selecting the schematic already set does not reopen the dialog. This auto-open applies only to the manual schematic selection dialog; a schematic applied by blueprint placement (REQ-UI-BLUEPRINT-PLACE) does **not** auto-open the dialog. The player may still cancel the auto-opened dialog (REQ-MOD-UI-DIALOG), which leaves the newly selected schematic in place with its default empty layout; the "Configure" button (REQ-MOD-UI-PREVIEW) remains available to open the dialog again later.
 
 - REQ-MOD-UI-MODULE-TOOLTIP: Each module selection button in the layout configuration dialog (REQ-MOD-UI-DIALOG) shows a hover tooltip with the descriptive text defined for that module type in `modules.toml` (the optional per-module tooltip field). If a module type defines no tooltip text, its button shows no tooltip. The "Remove" button is not a module type and has no config-defined tooltip.