say what a belt is carrying, and clear it by name

The belt card's only content was a button reading "Clear stuck items", which
assumes a state the items need not be in. It becomes "Clear items", and above it
the card now lists what the selected tiles carry -- one item chip per type, as
the buffer sections and the HQ's block stock draw them -- so the player reads a
line's contents before emptying it, and can read them at all: items on a moving
belt are too small and too transient to count by eye, and items inside a tunnel
cannot be seen.

The tunnel's two ends are now told apart. In-transit items are counted on the
exit they are travelling toward, and a clear removes exactly what the panel
listed for the tile being cleared: the exit discards them, the entry leaves them
travelling. That inverts BeltSystemTest's "clearTiles discards tunnel transit
items", which asserts the entry behaviour being dropped.

Splitters now aggregate with belts and tunnel ends, which needed the aggregation
rule's principle narrowed: the *runtime* content must aggregate, while a
per-object configuration is simply dropped for want of a single object to
configure. A splitter's output filters therefore appear only when that splitter
is selected alone. Miners are unaffected and the requirement now says why -- a
buffer chip states a count against that building's capacity and a production
section one cycle's completion, neither of which means anything summed.

The list and the button appear only on a selection of belt-subsystem tiles
alone; the mixed count summary loses the clear action it carries today, a button
that silently acts on part of a selection being worse than no button.

Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Ne3mejABZoLWKLh8fgpM3x

docs/requirements.md

@@ -160,7 +160,7 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
 - REQ-BLD-SHIPYARD: **Shipyard** (4×2): The player selects a schematic. When all required materials — the ship's base materials (`[ship.schematic].materials`) plus the materials of all modules in the configured layout (REQ-MOD-MATERIALS) — are present in its input buffer, the shipyard consumes them and begins a production cycle lasting the ship's base `[ship.schematic].production_time_seconds` plus the sum of production times contributed by all module instances in the configured layout (REQ-MOD-PRODUCTION-TIME). One ship of that type is spawned with the configured modules when the cycle completes. The shipyard cannot start a new cycle while one is in progress. If the player confirms a layout change (REQ-MOD-UI-DIALOG) while a production cycle is in progress, the current cycle is cancelled and all consumed materials are discarded; the shipyard returns to idle with the new layout configuration. Confirming a layout identical to the one already configured is not a change and cancels nothing (REQ-MAT-INPUT-BUFFER).
 - REQ-BLD-SALVAGE-BAY: **Salvage Bay** (3×2): A dedicated drop-off point for salvage ships. It has a single output buffer — scrap is the only thing it ever holds — whose holding capacity is defined by the `output_buffer_capacity` field of the `salvage_bay` entry in `buildings.toml` (rather than by a production cycle, since the Salvage Bay has no recipe). A ship at the bay hands over one unit of scrap per tick while the buffer has free space; a full buffer blocks further drop-off until space frees up (consistent with the buffer-full semantics of REQ-MAT-OUTPUT-BUFFER). Held scrap is pushed onto connected output belts.
 - REQ-BLD-BELT: **Belt** (1×1): Transports items. A belt tile has one direction (N, S, E, W) set at placement (modified by rotation). Curved belts are auto-derived: when a belt tile's outgoing direction leads into another belt whose direction is orthogonal, the downstream belt is rendered and behaves as a curve. Belt speed is defined in `world.toml [world].belt_speed_tiles_per_second` (REQ-GW-BELT-SPEED). A belt accepts items only through a non-output edge (REQ-MAT-ACCEPT-DIR).
-- REQ-BLD-SPLITTER: **Splitter** (1×1): Distributes incoming items between two output directions. Incoming items are accepted only through the splitter's non-output edges (REQ-MAT-ACCEPT-DIR). Each output can optionally have a filter (a list of item types), configurable via the selection panel; only implicitly unlocked item types are available as filter options (REQ-LOCK-UI-SPLITTER). Routing rules:
+- REQ-BLD-SPLITTER: **Splitter** (1×1): Distributes incoming items between two output directions. Incoming items are accepted only through the splitter's non-output edges (REQ-MAT-ACCEPT-DIR). Each output can optionally have a filter (a list of item types), configurable via the selection panel while that splitter is the only selected object (REQ-UI-SELECTION-AGGREGATE); only implicitly unlocked item types are available as filter options (REQ-LOCK-UI-SPLITTER). Routing rules:
   - An item matching only one output's filter is routed to that output.
   - An item matching both outputs' filters is distributed by strict alternation between those outputs.
   - An item matching neither output's filter is routed to the unfiltered output. If both outputs have a filter and the item matches neither, the splitter stalls and moves no items until the situation is resolved.
@@ -174,7 +174,7 @@ Any ship, module, building, or assembler recipe id that appears in no unlock gro
   - Otherwise the entry is unpaired.
   - Pairing is one-to-one: each Tunnel Entry pairs with at most one Tunnel Exit, and vice versa. A Tunnel Exit is claimed by the nearest Tunnel Entry that can validly reach it; all other entries for which it would otherwise qualify are unpaired.
   - When one end of a pair is deconstructed, the pair is dissolved and any items currently in transit are discarded.
-- REQ-BLD-TUNNEL-TRANSIT: **Tunnel transit.** Items inside a tunnel are not rendered (they travel invisibly). Transit time equals the tile-coordinate distance between entry and exit divided by `world.toml [world].belt_speed_tiles_per_second`, matching the time a chain of belt tiles of equivalent length would take. Multiple items may be in transit simultaneously, spaced as they would be on a belt chain of the same length. Clearing a tunnel entry or exit tile (REQ-UI-BELT-CLEAR) also discards all items currently in transit through that tunnel.
+- REQ-BLD-TUNNEL-TRANSIT: **Tunnel transit.** Items inside a tunnel are not rendered (they travel invisibly). Transit time equals the tile-coordinate distance between entry and exit divided by `world.toml [world].belt_speed_tiles_per_second`, matching the time a chain of belt tiles of equivalent length would take. Multiple items may be in transit simultaneously, spaced as they would be on a belt chain of the same length. Clearing a tunnel **exit** tile (REQ-UI-BELT-CLEAR) also discards all items currently in transit through that tunnel; clearing a tunnel **entry** discards only what sits on the entry tile itself. The two ends are told apart so that what a clear removes is exactly what the panel listed for the tile being cleared (REQ-UI-BELT-ITEMS), the in-transit items being counted on the exit they are travelling toward. Emptying a tunnel is therefore done from its exit.
 - REQ-BLD-TUNNEL-SELECT-HIGHLIGHT: **Selected-tunnel connection highlight.** While a Tunnel Entry or Tunnel Exit — operational building or construction site — is part of the current selection (single selection or multi-selection, REQ-UI-MULTI-SELECT), its tunnel connection is marked green in the game world, using the same `visuals.toml [overlays].tunnel_preview` green as the placement connection preview (REQ-BLD-TUNNEL-MODE). The matching end is found by applying the pairing scan of REQ-BLD-TUNNEL-PAIR over both built tunnels **and** construction-site tunnels (site-inclusive, matching the placement preview): for a selected entry, the first same-direction tunnel within `tunnel_max_distance` along its facing direction, if it is a Tunnel Exit; for a selected exit, the first same-direction tunnel within `tunnel_max_distance` opposite its facing direction, if it is a Tunnel Entry. When a matching end is found, the entry tile, the exit tile, and every tile strictly between them (along the tunnel's straight run) are marked green. A selected tunnel with no matching end shows no green highlight (it still receives the normal selection outline). In multi-selection each selected tunnel end that has a matching end contributes its connection, and a given connection is shown whenever either of its ends is selected. The highlight is presentation-only and has no effect on the simulation.
 
 ## Material Transport & Buffers
@@ -540,7 +540,7 @@ The screen is a single column: a header bar across the top and the game world vi
 
   Because the contest-zone boundaries shift as the scrollable area grows with each push (REQ-GW-PUSH-EXPAND, REQ-GW-SCROLL-LIMIT), the ramp bands are recomputed from the current contest-zone boundaries. This is a presentation-only concern and does not affect the simulation, consistent with REQ-UI-NO-ZOOM.
 - REQ-UI-WORLD-ICON: In the game world, a building is drawn with an icon's glyph symbol centered on its footprint, in place of the letter identity glyph. The icon is an SVG loaded from `data/icons/buildings/`; only the icon's glyph is drawn in the world — in a contrasting ink (white over dark fills, dark over light fills) so it stays legible — and its colored chip background is omitted, because the footprint is already filled with the building's `visuals.toml` fill color. This applies to the production buildings (Miner, Smelter, Assembler, Reprocessing Plant, Shipyard, Salvage Bay), the HQ, and the player and enemy defence stations, wherever the identity label appears: operational buildings, construction sites (REQ-UI-CONSTRUCTION-PROGRESS), and the builder-mode and blueprint-placement ghosts. **Belts, splitters, and tunnels are excluded** — they keep their existing tile rendering so their orientation and flow stay readable (a centered icon would obscure direction). Their build-menu buttons still use icons (REQ-UI-BUILD-ICON); in particular the shared Tunnel button's `tunnel_entry.svg` is a build-button icon only, not a world icon. The directional output-port glyphs (REQ-UI-PORT-GLYPH, REQ-UI-PORT-TARGET-GLYPH) are a separate indicator and are unaffected. A building or station with no icon file falls back to its `visuals.toml` text glyph; a type with neither icon nor glyph shows no identity label. A missing icon is not an error, consistent with REQ-UI-BUILD-ICON.
-- REQ-UI-ITEM-ICON: In the game world, an item is drawn as its `visuals.toml` colored square (`fill` + `outline`, the square of REQ-GW-TILE-SIZE) carrying its **item icon** on top. The square is drawn for every item, with or without an icon: it is what gives the item contrast against the tile beneath it, and its outline is what separates neighbouring items where they overlap on a belt. The icon is a self-contained, full-color SVG (rendered as-is, unlike the glyph-only building icons of REQ-UI-WORLD-ICON), loaded at runtime from `data/icons/items/` — a sibling of the config directory, read the same way as the building icons (REQ-UI-BUILD-ICON) — one file per item type named after the item's id (e.g. `iron_ore.svg`). The square fills the item's half-tile rect, keeping the size, spacing, and draw-order rules of REQ-GW-TILE-SIZE; the icon is drawn **inset** within that rect so a frame of the square's color stays visible all around it — required because each icon's viewBox is cropped tight to its artwork, so an icon drawn at the full rect would cover the square entirely. This applies wherever an item is drawn: on belts, splitters, and tunnel ends, and while emerging from or sinking into a building port (REQ-MAT-OUTPUT-EMERGE, REQ-MAT-INPUT-INTAKE). An item type with no icon file shows the colored square alone; a missing icon is not an error, consistent with REQ-UI-BUILD-ICON. **The colored square travels with the icon into the UI.** Wherever the UI displays an item *as an item* — the selection panel's item chips (REQ-UI-SINGLE-SELECTION, REQ-UI-HQ-PANEL), the recipe summary's input and output icons (REQ-UI-RECIPE-SUMMARY), and those same icons wherever a recipe is drawn in that form: on the selection dialog's option buttons (REQ-UI-SELECT-OPTIONS), in the item production tooltip (REQ-UI-ITEM-TOOLTIP), and in the unlock-choice dialog's recipe lines (REQ-DEF-SCHEMATIC-DROP) — the icon is drawn on that same square, by the same rules: the item's `fill` and `outline` from `visuals.toml`, the icon inset within the square so a frame of the square's color stays visible all around it, and the square alone when the item has no icon file. The square fills the rect the display allots to the icon, as it fills the half-tile rect in the world. One item therefore reads the same in a panel as it does on a belt. The one exception is an **inline icon standing in for the item's name beside a number** on a line of text: the `building_block` icon in place of the word `Blocks` (REQ-UI-BLOCKS-ICON, REQ-UI-EXPAND-BUTTON, REQ-UI-BUILD-COST, REQ-UI-MULTI-SELECTION, REQ-UI-BLUEPRINT-CARD), and the `scrap` icon in place of the word `Scrap` in the debris panel's remaining-scrap value (REQ-UI-DEBRIS-PANEL, REQ-UI-FIELD-MULTI-SELECTION). There the icon is a decoration on a line of text rather than an item display: it is drawn bare, without the square, and sized to the height of the text it sits in. It still stands in for the item's name, so the value it sits in explains that item as an item chip does, unless it sits inside a button (REQ-UI-ITEM-VALUE-TOOLTIP). Where the same value is instead shown *as an item* it keeps the square, as the HQ's block stock chip does beside the header bar's bare block icon (REQ-UI-HQ-PANEL). For performance, each item icon is rasterized to a pixmap cached per target pixel size — re-rasterized only when the tile pixel size changes (e.g. on view resize) — rather than re-rendered from vector every frame.
+- REQ-UI-ITEM-ICON: In the game world, an item is drawn as its `visuals.toml` colored square (`fill` + `outline`, the square of REQ-GW-TILE-SIZE) carrying its **item icon** on top. The square is drawn for every item, with or without an icon: it is what gives the item contrast against the tile beneath it, and its outline is what separates neighbouring items where they overlap on a belt. The icon is a self-contained, full-color SVG (rendered as-is, unlike the glyph-only building icons of REQ-UI-WORLD-ICON), loaded at runtime from `data/icons/items/` — a sibling of the config directory, read the same way as the building icons (REQ-UI-BUILD-ICON) — one file per item type named after the item's id (e.g. `iron_ore.svg`). The square fills the item's half-tile rect, keeping the size, spacing, and draw-order rules of REQ-GW-TILE-SIZE; the icon is drawn **inset** within that rect so a frame of the square's color stays visible all around it — required because each icon's viewBox is cropped tight to its artwork, so an icon drawn at the full rect would cover the square entirely. This applies wherever an item is drawn: on belts, splitters, and tunnel ends, and while emerging from or sinking into a building port (REQ-MAT-OUTPUT-EMERGE, REQ-MAT-INPUT-INTAKE). An item type with no icon file shows the colored square alone; a missing icon is not an error, consistent with REQ-UI-BUILD-ICON. **The colored square travels with the icon into the UI.** Wherever the UI displays an item *as an item* — the selection panel's item chips (REQ-UI-SINGLE-SELECTION, REQ-UI-HQ-PANEL, REQ-UI-BELT-ITEMS), the recipe summary's input and output icons (REQ-UI-RECIPE-SUMMARY), and those same icons wherever a recipe is drawn in that form: on the selection dialog's option buttons (REQ-UI-SELECT-OPTIONS), in the item production tooltip (REQ-UI-ITEM-TOOLTIP), and in the unlock-choice dialog's recipe lines (REQ-DEF-SCHEMATIC-DROP) — the icon is drawn on that same square, by the same rules: the item's `fill` and `outline` from `visuals.toml`, the icon inset within the square so a frame of the square's color stays visible all around it, and the square alone when the item has no icon file. The square fills the rect the display allots to the icon, as it fills the half-tile rect in the world. One item therefore reads the same in a panel as it does on a belt. The one exception is an **inline icon standing in for the item's name beside a number** on a line of text: the `building_block` icon in place of the word `Blocks` (REQ-UI-BLOCKS-ICON, REQ-UI-EXPAND-BUTTON, REQ-UI-BUILD-COST, REQ-UI-MULTI-SELECTION, REQ-UI-BLUEPRINT-CARD), and the `scrap` icon in place of the word `Scrap` in the debris panel's remaining-scrap value (REQ-UI-DEBRIS-PANEL, REQ-UI-FIELD-MULTI-SELECTION). There the icon is a decoration on a line of text rather than an item display: it is drawn bare, without the square, and sized to the height of the text it sits in. It still stands in for the item's name, so the value it sits in explains that item as an item chip does, unless it sits inside a button (REQ-UI-ITEM-VALUE-TOOLTIP). Where the same value is instead shown *as an item* it keeps the square, as the HQ's block stock chip does beside the header bar's bare block icon (REQ-UI-HQ-PANEL). For performance, each item icon is rasterized to a pixmap cached per target pixel size — re-rasterized only when the tile pixel size changes (e.g. on view resize) — rather than re-rendered from vector every frame.
 - REQ-UI-CONSTRUCTION-PROGRESS: Construction sites display the building's identity symbol centered on the footprint (same as an operational building) — its icon glyph, or the text glyph as a fallback (REQ-UI-WORLD-ICON). Below the symbol — or centered on the footprint if the building has neither an icon nor a glyph — a construction progress percentage is shown (integer, e.g. `42%`), increasing from 0% to 100% as construction completes.
 - REQ-UI-PORT-GLYPH: Every output port of every building is indicated by a directional glyph drawn on the port's tile. The glyph is a `>` rotated to face the port's exit direction (`>` for East, `^` for North, `<` for West, `v` for South). It is drawn at the midpoint between the tile center and the tile edge that the port exits through (i.e. halfway from center toward the exit edge). The indicator is rendered for all building states: operational buildings, construction sites, and the builder-mode ghost. Buildings with multiple output ports (e.g. splitters) show one indicator per port.
 - REQ-UI-PORT-TARGET-GLYPH: While in builder mode (REQ-BLD-BUILDER-MODE), the builder-mode ghost additionally shows, for each of the building's output ports, a directional glyph drawn centered in the port's **target cell** — the cell immediately outside the footprint that the port pushes into, i.e. the cell the surface-mask output-port indicator occupies (see Surface Mask Format). As in REQ-UI-PORT-GLYPH the glyph is a `>` rotated to face the port's exit direction (`>` East, `^` North, `<` West, `v` South), previewing where the port's output will go before placement. This is in addition to the on-tile port glyph of REQ-UI-PORT-GLYPH, and — unlike that indicator — is shown only for the builder-mode ghost, not for operational buildings, construction sites, or the blueprint-placement ghost (REQ-UI-BLUEPRINT-PLACE). A building with multiple output ports (e.g. a splitter) shows one target-cell glyph per port. The target-cell glyph is drawn larger than the on-tile port glyph so it stands out as the flow-direction preview. Exceptions: the Tunnel Entry shows no target-cell glyph, because it receives items (which may arrive from any of its non-mouth edges, REQ-BLD-TUNNEL-ENTRY) rather than emitting into a single adjacent cell; the Shipyard shows none either, because its output port is a ship-spawn point (REQ-SHP-SPAWN-PLAYER) rather than a belt-item output (REQ-MAT-OUTPUT-EMERGE).
@@ -617,7 +617,7 @@ The panel shows exactly one **content** at a time, picked from the catalog in RE
 - REQ-UI-SELECTION-CARD: **Card structure.** Every panel content is a card with the same three parts, top to bottom:
   - **Header** — always shown. It holds the selection's identity symbol on the left — the building's icon glyph (REQ-UI-WORLD-ICON), a ship's schematic color swatch, or the kind symbol of a defence station or piece of debris — the selection's name beside it, and one optional **right slot**. The right slot holds a status indicator (REQ-UI-SELECTION-STATUS), a ship's current behavior (REQ-UI-SHIP-BEHAVIOR), or an object count — never more than one of them; which one applies is stated per content in REQ-UI-SELECTION-CONTENT. The header carries no control of its own, and doubles as the panel's drag handle (REQ-UI-SELECTION-PANEL-DRAG).
   - **Configuration group** — the controls that change how the selected object is set up: the recipe/schematic selection control (REQ-UI-SELECT-BUTTON), a shipyard's layout preview and Configure button (REQ-MOD-UI-PREVIEW), and a splitter's output filters (REQ-BLD-SPLITTER). It is shown identically for an operational building and for a construction site of the same type (REQ-BLD-SITE-CONFIG).
-  - **Runtime group** — what the object is currently doing: buffer contents, production progress, HP, remaining scrap, and the belt clear action (REQ-UI-BELT-CLEAR). Where the object has **HP**, its bar is the first thing in this group, above everything else the card shows (REQ-UI-HQ-PANEL, REQ-UI-SHIP-STATS-PANEL, REQ-UI-STATION-STATS-PANEL) — how close the thing is to dying outranks what it is holding. For a **construction site** the entire runtime group is replaced by a captioned `Construction` section: a progress bar filled to the site's construction completion with that completion as an integer percentage beside the caption — the same value the world draws on the footprint (REQ-UI-CONSTRUCTION-PROGRESS) — followed by a note that buffers appear once the building is built, because a site has neither buffers nor a production cycle (REQ-BLD-SITE-CONFIG). That section sits **directly below the header, above the configuration group**, so how far along the site is reads first; the configuration group is otherwise unaffected and stays visible on a site.
+  - **Runtime group** — what the object is currently doing: buffer contents, production progress, HP, remaining scrap, and the items on belt tiles with the clear action beneath them (REQ-UI-BELT-ITEMS, REQ-UI-BELT-CLEAR). Where the object has **HP**, its bar is the first thing in this group, above everything else the card shows (REQ-UI-HQ-PANEL, REQ-UI-SHIP-STATS-PANEL, REQ-UI-STATION-STATS-PANEL) — how close the thing is to dying outranks what it is holding. For a **construction site** the entire runtime group is replaced by a captioned `Construction` section: a progress bar filled to the site's construction completion with that completion as an integer percentage beside the caption — the same value the world draws on the footprint (REQ-UI-CONSTRUCTION-PROGRESS) — followed by a note that buffers appear once the building is built, because a site has neither buffers nor a production cycle (REQ-BLD-SITE-CONFIG). That section sits **directly below the header, above the configuration group**, so how far along the site is reads first; the configuration group is otherwise unaffected and stays visible on a site.
 
   A group with nothing to show takes no space, so a content may consist of a header alone. Within a group, related parts form **sections** carrying a short caption above them (e.g. `Layout`, `Input buffers`, `Production`, `Output buffers`); a section and its caption are shown only while that section has content, so e.g. a Miner (which consumes nothing) shows no input buffer section.
 - REQ-UI-SELECTION-CONTENT: **Content catalog.** Which content the panel shows follows from the selection alone:
@@ -628,8 +628,8 @@ The panel shows exactly one **content** at a time, picked from the catalog in RE
   | Shipyard | status | schematic control + layout preview + Configure | buffers + production |
   | Salvage Bay | status | — | buffers |
   | HQ | — | — | block stock + HP |
-  | Belt, Tunnel Entry, Tunnel Exit | count | — | clear action |
-  | Splitter | — | output filters | clear action |
+  | Belt, Tunnel Entry, Tunnel Exit, Splitter | count | — | items + clear action |
+  | One splitter alone | — | output filters | items + clear action |
   | Several buildings | — | — | type counts + total cost |
   | One ship | behavior | — | HP + hull stats + module summaries |
   | One defence station | — | — | HP + stats |
@@ -638,11 +638,11 @@ The panel shows exactly one **content** at a time, picked from the catalog in RE
 
   Selections sharing a row of this table get the same content and differ only in the name and symbol in the header. A count in the right slot appears only for an aggregated multi-selection (REQ-UI-SELECTION-AGGREGATE); a single selection of those types shows an empty slot.
 - REQ-UI-SELECTION-STATUS: **Status indicator.** For a building whose production state is already rendered in the world as a status light (REQ-UI-STATUS-LIGHT) — Miner, Smelter, Assembler, Reprocessing Plant, Shipyard, Salvage Bay — the header's right slot repeats that same state as a colored dot with a short caption beside it, so the panel and the world never disagree. The state is derived from the evaluation defined in REQ-UI-STATUS-LIGHT rather than from a second definition, and the dot uses that state's fill color from `visuals.toml [status_light]`. The captions name the state: `no recipe` (grey), `producing` (green), `missing input` (red), `output full` (yellow); for the Salvage Bay, `holding scrap` (green) and `empty` (red). A selected **construction site** shows the caption `constructing` with no dot, whatever its type. Buildings with no status light — belts, splitters, tunnel ends, the HQ — show nothing in the slot.
-- REQ-UI-SELECTION-AGGREGATE: **Aggregating a homogeneous multi-selection.** When several objects are selected and their content can be shown as one — the same content, with its values aggregated over the whole selection — the panel shows that single content with the number of selected objects in the header's right slot (`x<count>`), instead of the count summary of REQ-UI-MULTI-SELECTION / REQ-UI-FIELD-MULTI-SELECTION. This applies exactly where every part of the content aggregates:
-  - **Belt-subsystem tiles** — any mix of belts, tunnel entries, and tunnel exits. Their content is the clear action alone, which already acts on the whole selection (REQ-UI-BELT-CLEAR).
+- REQ-UI-SELECTION-AGGREGATE: **Aggregating a homogeneous multi-selection.** When several objects are selected and their content can be shown as one — the same content, with its values aggregated over the whole selection — the panel shows that single content with the number of selected objects in the header's right slot (`x<count>`), instead of the count summary of REQ-UI-MULTI-SELECTION / REQ-UI-FIELD-MULTI-SELECTION. This applies where every part of the **runtime** content aggregates. A **per-object configuration** does not stand in the way: it is simply not shown, there being no single object for it to configure.
+  - **Belt-subsystem tiles** — any mix of belts, tunnel entries, tunnel exits, and splitters. Their content is the item list and the clear action (REQ-UI-BELT-ITEMS, REQ-UI-BELT-CLEAR), both of which already read and act on the whole selection. A splitter's output filters are per-object, so they are shown only when that splitter is the only selected object (REQ-BLD-SPLITTER); an aggregate holding one or more splitters shows no filters at all. The card is named after the type of the **first tile** in the selection, whatever the mix, and the count in the right slot says how many are held.
   - **Debris** — several pieces of debris and nothing else. Their remaining scrap sums into one value (REQ-UI-DEBRIS-PANEL).
 
-  Every other multi-selection falls back to the count summary. In particular a selection mixing a splitter with belts does not aggregate (a splitter carries per-object output filters, which have no aggregate), and neither do several production buildings of one type (per-building buffers and cycle progress have no aggregate).
+  Every other multi-selection falls back to the count summary. In particular several production buildings of one type — three miners, say — still do not aggregate, and the relaxation above does not change that: what stops them is their **runtime** content, not their recipe control. A buffer chip states a count against *that building's* capacity (`a / b`, REQ-MAT-OUTPUT-BUFFER) and a production section states *one* cycle's completion; summing three miners' ore into one chip would state a figure no buffer holds and no belt can draw, and averaging three cycle percentages would describe no building. Only where the runtime content is genuinely a property of the whole selection — items lying on a set of tiles, scrap remaining across a set of debris — is there one card to show.
 - REQ-UI-SINGLE-SELECTION: When one building is selected, the panel shows its symbol and name in the header (REQ-UI-SELECTION-CARD), its current recipe or schematic selection (REQ-UI-SELECT-BUTTON) and recipe summary (REQ-UI-RECIPE-SUMMARY) in the configuration group, and its input and output buffer contents in the runtime group. Each buffered item is shown as an **item chip** bearing that item's icon on its colored square (REQ-UI-ITEM-ICON) and its current count, and hovering or clicking a chip shows that item's production tooltip (REQ-UI-ITEM-TOOLTIP):
   - an **input** chip shows the per-cycle amount below the count (the items consumed per run, e.g. `/ 2 per cycle`), or the count alone when the building has no selected recipe or schematic to give one;
   - an **output** chip shows the count against **that item's own** output buffer capacity as `a / b` (REQ-MAT-OUTPUT-BUFFER), with the item's name below. Each output chip therefore stands for one buffer, and a Reprocessing Plant shows one for every item any of its output groups can produce (REQ-MAT-OUTPUT-GROUP).
@@ -673,7 +673,13 @@ The panel shows exactly one **content** at a time, picked from the catalog in RE
   - **An item whose every producing recipe is still locked.** The caption stays `Produced by`, and the single line beneath it reads `Undiscovered`: the player is told the item is made somehow, without being shown a path they have not unlocked yet.
 
   Which displays show this tooltip is REQ-UI-ITEM-VALUE-TOOLTIP: item chips, the values that state an amount of an item with a bare inline icon, and the icons of a recipe summary wherever one is drawn — on the option buttons of the selection dialog too, whose faces describe the option and say nothing about its items (REQ-UI-SELECT-OPTIONS). The exceptions are an item named on a display that carries a tooltip of its own, and the recipe lines within this tooltip itself, which are already inside one.
-- REQ-UI-BELT-CLEAR: When one or more belt, splitter, tunnel entry, or tunnel exit tiles are selected, the panel's runtime group shows a **"Clear stuck items"** button that removes all items from the selected tiles. Clearing a tunnel entry or exit also discards all items currently in transit through that tunnel (REQ-BLD-TUNNEL-TRANSIT). This can be used to resolve stalled belts, splitters, and tunnels. The button acts on every selected tile, which is why a selection of belts and tunnel ends aggregates into one content rather than a count summary (REQ-UI-SELECTION-AGGREGATE).
+- REQ-UI-BELT-ITEMS: When one or more belt, splitter, tunnel entry, or tunnel exit tiles are selected, the panel's runtime group shows a captioned **`Items`** section stating what those tiles are carrying, above the clear action (REQ-UI-BELT-CLEAR) — the player reads what is there before removing it. Each item type present is shown as an **item chip** bearing the item's icon on its colored square (REQ-UI-ITEM-ICON) with the number of units held and the item's name below it, and hovering or clicking the chip shows that item's production tooltip (REQ-UI-ITEM-TOOLTIP) — the same chip the buffer sections and the HQ's block stock use (REQ-UI-SINGLE-SELECTION, REQ-UI-HQ-PANEL). This is what makes a belt's contents readable at all: on a moving line the items are too small and too transient to count by eye, and inside a tunnel they cannot be seen.
+  - **Counts sum over the whole selection**, so there is one chip per item type however many tiles are held, matching the clear action's reach (REQ-UI-SELECTION-AGGREGATE).
+  - **Items in transit through a tunnel** (REQ-BLD-TUNNEL-TRANSIT) are counted on the **tunnel exit**, that being where they will arrive; a selected tunnel entry counts only what is on its own tile. Selecting the exit is therefore how the player sees what a tunnel is currently swallowing, and how a tunnel is emptied (REQ-UI-BELT-CLEAR).
+  - Unlike a building's buffers, a belt has no fixed set of item types it can hold, so the section lists only the types actually present and shows no `0` chips. The chips keep the order the items are declared in config, so a chip does not jump about as counts change. When the selection carries nothing at all the section stays and reads the note `No items`, so the card holds one shape while items come and go.
+- REQ-UI-BELT-CLEAR: Below that list, the panel's runtime group shows a **"Clear items"** button that removes all items from the selected tiles. It is named for what it does rather than for a state it assumes: the items on a belt need not be stuck, and emptying a line is just as often what the player wants of a line that is running. It removes exactly what the list above it shows, tile for tile: clearing a **tunnel exit** therefore also discards the items in transit through that tunnel, which are counted on the exit, while clearing a **tunnel entry** leaves them travelling (REQ-BLD-TUNNEL-TRANSIT, REQ-UI-BELT-ITEMS). This can be used to resolve stalled belts, splitters, and tunnels. The button acts on every selected tile, which is why any mix of belt-subsystem tiles aggregates into one content rather than a count summary (REQ-UI-SELECTION-AGGREGATE).
+
+  Both the list and the button appear only where the selection holds **nothing but** belt-subsystem tiles. A selection mixing them with other buildings shows the count summary (REQ-UI-MULTI-SELECTION) and carries neither: a button that silently acted on part of a selection would be worse than no button, and the player can select the tiles alone.
 - REQ-UI-HQ-PANEL: When the HQ is selected, the panel shows the HQ's **HP** as a bar labelled `current / maximum` (REQ-HQ-STATS, REQ-UI-HP-BARS) and, beneath it, the **global building blocks stock** — the same value as the header bar's stock display (REQ-UI-BLOCKS-ICON), rendered as an item chip (REQ-UI-SINGLE-SELECTION) carrying the `building_block` icon on its colored square — a chip is an item display, so it takes the square even though the header bar's inline block icon does not (REQ-UI-ITEM-ICON, REQ-UI-BLOCKS-ICON), and hovering or clicking it shows the item production tooltip as any other chip does (REQ-UI-ITEM-TOOLTIP). The HP comes first, as it does on every card that has it (REQ-UI-SELECTION-CARD). The HQ has no input or output buffers of its own: building blocks delivered by belt go straight into the global stock (REQ-HQ-BELT-INPUT), and showing that stock on the HQ is what tells the player to route blocks there. The HQ has no configuration group and no status indicator (REQ-UI-SELECTION-STATUS), and it is never a construction site.
 - REQ-UI-ENTITY-CLICK-SELECT: The player can click any ship (player or enemy) or any defence station (player or enemy) in the game world to select it. A plain click on a ship or defence station makes it the sole selection, clearing any previous selection. Ships and defence stations can be multi-selected — by Ctrl+clicking individual actors to add or remove them, or by box-drag (REQ-UI-MULTI-SELECT) — and can be selected together with debris and with one another in a single field selection (REQ-UI-SELECTION-CATEGORIES), freely mixing player and enemy actors. Actors cannot be selected together with buildings: selecting a ship or defence station clears any building selection, and selecting a building clears the actors (buildings win). Clicking a piece of debris adds to or establishes a field selection (REQ-UI-DEBRIS-CLICK-SELECT). Clicking empty world space (no building, ship, defence station, or piece of debris) clears the selection.
 - REQ-UI-SHIP-STATS-PANEL: When exactly one ship is selected (REQ-UI-ENTITY-CLICK-SELECT) and no debris is selected, the selection panel shows a **ship stats panel**. (If debris is also selected, the panel shows the compact count summary instead, per REQ-UI-FIELD-MULTI-SELECTION.) The panel structure mirrors REQ-MOD-UI-STATS-PANEL but reflects the ship's actual live state: stats are computed from its installed modules per REQ-MOD-STAT-CALC. Its header (REQ-UI-SELECTION-CARD) carries the schematic's color swatch and display name, with the ship's current behavior in the right slot (REQ-UI-SHIP-BEHAVIOR). The panel always shows all hull stats: HP (current / maximum) as a **bar** with the two values beside its caption, then max linear speed, sensor range, main acceleration, maneuvering acceleration, angular acceleration, and max rotation speed as label/value rows. In addition, capability module summaries are shown below the hull stats, each as its own outlined row, conditioned on which module types are installed and using the same aggregation rules as REQ-MOD-UI-STATS-PANEL: weapons (combined DPS, maximum range), salvage (combined collection rate, maximum range), and repair (combined repair rate, maximum range), each appearing only if at least one instance of that module type is installed. While debug draw mode is active (REQ-UI-DEBUG-DRAW), the panel additionally shows the ship's derived threat cost (REQ-MOD-THREAT).